orange橘子平台_orange橘子中文版_orange游戏平台

 0531-86920283

什么情况下需要对山东美缝剂进行加热?

分享到:
点击次数:1186 更新时间:2020年04月16日15:41:23 打印此页 关闭

山东美缝剂有很多事情需要注意,很多施工师傅都说只有专业人士才能做好,那些所谓的自己动手,不经过几年的努力完全做不出美缝。那么,在美缝构造中隐藏着什么秘密呢?在施工的时候,为什么很多师傅都要用热水来加热山东美缝剂,这有什么好处呢?

  There are many things to pay attention to when making Shandong sewing agent. Many construction masters say that only professionals can do it well. Those so-called do it yourself can't do it without several years' efforts. So, what's the secret hidden in the beautiful sewing structure? During the construction, why do many masters use hot water to heat Shandong beautiful sewing agent? What's the advantage of this?

  你为什么要加热美缝剂?

  Why do you want to heat the stitcher?

  许多美缝剂师傅会在上胶前把缝衣剂放入热水中。这是因为环氧树脂和固化剂在缝纫剂中很容易受到温度的影响。温度越低,美缝剂越稠,上胶越困难,温度越高,美缝剂胶体越薄,上胶也很容易成型。一般情况下,温度在5℃以下不能使用,低于10℃会用水加热,否则很难粘接。

  Many sewing artists put the sewing agent into hot water before applying the glue. This is because epoxy resin and curing agent are easily affected by temperature in sewing agent. The lower the temperature is, the thicker the tacking agent is, the more difficult it is to glue. The higher the temperature is, the thinner the tacking agent gel is, and the glue is easy to form. Generally, it can not be used when the temperature is below 5 ℃, and it will be heated with water when the temperature is below 10 ℃, otherwise it is difficult to bond.

  有些人可能会认为,如果胶的美缝剂更粘稠,手工上胶会很困难,可以直接用电动胶枪来代替,这样是不是更省力呢?如果温度低,胶厚,我们也不建议使用电动胶枪,尽管它可以节省精力,可以很容易地胶,但在低温,美国缝纫代理很容易爆炸管,漏胶,或由包含固化胶体粒子,影响美国的缝纫效果。这样,当温度较低时,就有必要对密封胶进行加热。

  Some people may think that if the adhesive is more viscous, it will be difficult to apply the adhesive manually, and it can be directly replaced by an electric glue gun. Is this more labor-saving? If the temperature is low and the glue is thick, we do not recommend the use of an electric glue gun. Although it can save energy and glue easily, at low temperatures, American sewing agents are easy to explode tubes and leak glue, Or by containing solidified colloidal particles, which affect the sewing effect in the United States. In this way, when the temperature is low, it is necessary to heat the sealant.

  有两种方法来加热密封胶。一种是用热水浸泡,另一种是用保温箱加热。

山东美缝剂

  There are two ways to heat the sealant. One is soaking in hot water, the other is heating in an incubator.

  1. 泡在热水中:准备好一个水桶,加入适量的热水,水温约为70℃,如果没有,也可以用热的快直接加热,不需要太热。将瓶子浸泡在热水中约15分钟,不要超过瓶口,然后取出并粘上,如果凝胶仍然难以发挥,你可以继续浸泡一段时间。

  1. Soak in hot water: prepare a bucket and add some hot water. The water temperature is about 70 ℃. If not, it can be heated directly and quickly without too much heat. Soak the bottle in hot water for about 15 minutes, do not exceed the bottle mouth, then remove and stick it. If the gel is still difficult to play, you can continue to soak for a period of time.

  2. 加热恒温器:孵化器更方便,可以给自己设定温度,然后把缝剂在让站可以加热箱,可以热几组美缝剂,不推迟建设,也不需要时间盯着,加热更均匀,胶体不会有气泡或浸泡。

  2. Heating thermostat: the incubator is more convenient. You can set the temperature for yourself, and then put the sewing agent in the transfer station to heat the box. You can heat several groups of sewing agents, without delaying the construction, or needing time to stare. The heating is more uniform, and the gel will not have bubbles or soak.

  以上就是对什么情况下需要山东美缝剂加热的详细介绍,想要了解更多请点击官网

  The above is a detailed introduction of the situation in which the heating of Shandong sewing agent is needed. For more information, please click http://www.jinanjiusun.com

上一条:山东美缝剂的作用以及区别? 下一条:剩余的山东美缝剂是否有其他用处?